Difference between revisions of "User:Beadsland/Nesting"
(→Office Chair Repair)
|Line 62:||Line 62:|
==== Steelcase Leap Chair ====
==== Steelcase Leap Chair ====
The cylinder button began getting depressed unintentionally again
The cylinder button began getting depressed unintentionally again. Dug out the old spacer and replaced with 70% infill PLAof . Rising is a bit stiff and requires multiple pulls on lever, but does then stay up until released. Will monitor. (as of //19)
=== Member Storage Audit ===
=== Member Storage Audit ===
Revision as of 04:23, 11 October 2019
Various DIY/smarthome and other projects about (or related to) the domicile.
- 1 Nesting
- 1.1 Outreach
- 1.2 Maintenance
- 1.3 Hackerspace
- 1.4 Roommmate Tech/Organizing Consult
- 1.5 DIY
- 1.6 Technology
- 1.7 Audio Computing
- 1.8 Miscellaneous
There's been some discussion of pursuing more active outreach and membership development for the space, including:
Scannable Code for Donations Flyer
Want to redo the donations notice at the space to include a QR Code or two to allow folk to quickly make donations from their mobile device if so inclined.
Creating a More Comfortable Environment
First step we're considering tackling is the kegerator/dishrack area. Ideas on the table:
Installing trays within the kegerator to store bottled beverages. There has been standing water at the bottom of the kegerator at times (whether due to a leak in the water keg or condensation), so trays would make things a bit less unpleasantly damp on retrieval. Related to this, we ought to have some sort of signage that makes clear what is on offer for the sake of visitors at such time as informed members are not present to explain what's what.
We're also examining options for rehanging or replacing the bathroom door to free up space on the bathroom wall now behind the swing of the door. The idea would be to install shelving on that wall for drying racks and dish storage.
Tag-Team Community Cross-Pollination
Going to conduct a survey to identify progressive-adjacent Meetup groups and other local orgs that we might want to develop ties with. The goal would be to find likeminded subject domain experts who might be interested in sharing knowledge and expertise within the HM community—fostering such relationships may also serve to bring new members to HM who might otherwise not have found us absent such outreach. Several members have expressed an interest in helping with this initiative.
Relatedly, am wanting to tap the broader (even global) hackerspace/makerspace community to bring in folk to offer talks or presentations on the history of the hacker, maker and DIY movements.
Crafts Event Prep
Flyers for October and November are due. Craft ideas research: mask making (for October); doll making (to find a use for many dozens of knitted dolly caps). Need to do an audit of our craft supplies and prepare orders to restock.
Have been sorely derelict on a heap of household and client bookkeeping and filing, while immersed in other recent making projects. This includes scheduling of long-overdue appointments and restocking our household pantry. Made some significant headway on this, might as well keep ball rolling.
Cliff sensors have been successfully disabled, and original left wheel reinstalled. Still unhappy with side brush performance—and will return to this eventually—but presently just glad to have this robot back in service.
They're actually quite nice socks, but yeah, they've got holes. Quite a few of them do, darnit.
One of our members has a telescope rig powered by a Raspberry Pi, but wants to tweak the UI running on the Raspbian desktop. Have promised to help them figure out what needs reconfiguring next time we're both in the space.
Office Chair Repair
Having already repaired three other office chairs of various designs and defects, another chair presents itself for fixing. This time, it's an old brown chair that is already an heirloom hack. A some time in the past, the bottom of the seat has been replaced/augmented with a wooden construction that appears to secure the seat cushion to the caster-base column. Since that time, the bolts holding this wooden bottom to the cushion have come loose on the front corners. A user who naively reached under the front of the chair to lift and move it, can accidentally catch their hand between the cushion and the wooden bottom.
The chair currently has the word "NO" inscribed in blue tape across the top of the cushion seat, to warn users, if not that they might get bitten by the chair, then at least that they ought to exercise caution.
On best examination, it appears the repair will involve removing the wooden bottom from the cushion, and then resecuring or replacing nuts that had previously held the wooden base bolted to the cushion seat.
Steelcase Leap Chair
The cylinder button began getting depressed unintentionally again. PLA+ failed in about 30 days—the straddle legs snapped off rather than the washer ring failing due to compression. Dug out the old spacer and replaced with another 70% infill PLA, pending the creation of a molded graphite replacement. Rising is a bit stiff and requires multiple pulls on lever, but does then stay up until released. Will monitor. (as of 10/11/19)
Member Storage Audit
Planning to go through our member storage shelves, identifying left-overs from former members, and moving less actively used bins to higher shelves, to better facilitate storage needs of new members in the future.
Roommmate Tech/Organizing Consult
- electronic birthday calendaring
- charitable giving analysis
- pruning their electronic task list
- research piano instruction apps for android
- getting them up and running to learn the ins and outs of using video conferencing tools
- organizing teaching materials filing system
- substitute teaching go pack strategy
- prepping unique favor packs for Halloweens
Dashboard Door Buzzer Integration
Wanting to wire a single-board device in to the building intercom system to detect the door buzzer. This will allow us to use the dashboard real-estate for other displays than the door camera, while still switching back to the camera swiftly when someone is buzzing for entry.
Various small and large projects have been waiting in the wings, including:
- rebuild/redesign Lego water fountain
- repair of a glitchy flat-screen monitor
- replacing broken window blinds
- retouching nylon on dishwasher racks
- repairing vinyl floor in kitchen
- securing a set of shoe holder mounts
- refurbishing an old hammer drill
- ceiling hook over bed
- replace wrights on lampshade of a standing lamp
- darning/patching bedsheets
- hem favorite scarf
Once repairs are out of the way, a number of household storage projects are on the agenda, including: a corner bar for hanging clothes and installing rack shelving in our kitchen
Completed: Bathroom storage tower has been cut to accommodate shut off valves, urethane and fresh paint applied, and installed in its new home.
Custom Craft Material Dollies
Our community crafts group has accumulated more donations than could every easily fit in our existing carts. We've resorted to lugging surplus around in oversize retail shopping bags. Moreover, the carts we do have aren't for outdoors use. They're fine for moving materials from our apartment to the community room the same building, but if we want (or need) to set up for an event in another building, the casters are not equipped for even well-maintained sidewalks, and we tend to see drawers slide open or and containers slide off shelves and topple to the ground as we trundle along on sloped grades. Finally, we've got some craft materials, namely yarn, fabrics and collage materials, that really need to be in larger containers that display their contents in an inviting way without having to unpack and repack those materials for each session.
Thus, there are three goals. First, to design a pair of dollies with custom, quick-assemble cage frameworks. The idea is that our existing craft carts could be lifted onto the dollies, providing heavy duty casters to get around outdoors, and then hemmed in by bars or slats that would keep drawers and shelf contents secure pending arrival at a destination. Providing for cover against rain or other weather would be a bonus. Second, to design a similar dolly for stacking larger containers than we currently aren't using, but would serve for bulk craft materials. Third, to design containers for bulk craft materials that quickly deploy as inviting displays of those same materials on site.
Data Processing Tower
The Tellurium project is proving very CPU-intensive. Generating a batch of 99 one-of-a-kind bespoke handbills easily takes six hours for my current computer to generate, plus another hour of post-processing, and then two hours of printer time. Further, the new toolchain (once gdp spelunking resolves current segfaults) will rely heavily on NLP processing, where parsing for word counts is already proving computation intensive.
Going to explore building out a custom box to handle chugging through these processes. In addition to building the toolchain to leverage multi-threading and multi-process techniques, as appropriate, am also considering the possibility of pushing some computations to GPU. The actual assembly of each word cloud (placing objects on a two-dimensional field) seems especially suited to GPU-based computation. This, of course, would require learning something about GPU-based solutions and figuring out what libraries exist or could be rewritten for GPU before specing out the new machine build.
The various electronic components on the table-level of my IKEA-built standing desk have become an unmanageable tangle. The plan is to build a pair of LackRack component mounts under the standing desk and transfer various Ethernet and power connected devices thereto. As part of this process, will build out a heat ducting system to channel air from below the desk to the intake vent of the convector a few feet away — taking advantage of the chiller cooled pipes that feed the convector in the summer.
Also want to run Ethernet to the back of our apartment, rather than rely on spotty performance of EoP extender currently in use. This will support the development of audio notification relays planned throughout the apartment for telephony and other applications listed below. Also, gonna set up a Pi as a wifi router for our wifi-only printer, as it has become a nuisance rebooting the main router every time the printer loses connectivity with the network.
Intending to replace current lighting fixtures with programmable smart bulbs and a custom driver that will adjust the level of blue light throughout the day, in accordance with my 2nd/graveyard-shift work cycle. This includes the appliance bulb in the refrigerator, so that one isn't treated to a blast of bright white light when scrounging a "midnight" snack. Also part of this project will be running motion-detector activated red LEDs along the hallways, to allow my roommate to get around early morning without disturbing my sleep by flipping on room lighting.
The first step will be to set up a dedicated console-cable managed wifi router and management hub that will allow for control of smart bulbs without exposing those devices to the Internet.
- integrated caller ID announcer
- mode-switchable caller ID blacklist/whitelist
- whistle-activated battery-powered nebulizer
- whistle/tone detector/alterter network for hearing impaired
- rice cooker setup detector
- no-brainer portable stereo media player
- multi-output audio stream relay
- nighttime noise machine lashup
- research hearing loop tech
- mezzanine rack for a compact dishwasher
- DIY kitchen counter LED hydroponics enclosure
- intensive file cabinet purge
- paint apartment
- empty storage unit
- guinea pig hutch with integrated hydroponic garden
- learn to bake
- learn to ride a bike
- learn ASL