Hack Manhattan Wiki - User contributions [en]

Meeting 2021-03-30

2021-03-25T02:02:48Z

Br: /* Admission of Michael as a member, see message to members list */

==Consensus Agenda==

=== Implement and adopt a CoC (Code of Conduct) ===

Rule 4 of the [[Rules]] is amended by striking the existing text and inserting:

<blockquote>The [[Code of Conduct]] applies.</blockquote>

The suspension and expulsion sanctions may require Bylaws changes which would have to be drafted and adopted at a formal meeting of members with 10 days’ notice. Giving that notice would require a board decision. The Code of Conduct will apply to the extent permitted by the Bylaws. As a temporary measure until the Bylaws can be amended, if the Code of Conduct Committee adopts a consequence that can only be implemented as a decision of the members, the Committee may recommend that consequence in a report at a business meeting, at which it must either pass on the Consensus Agenda, if there are no objections, or be voted upon without debate.

Rule 5 of the Rules is amended by adding at the end:

<blockquote>(f) An exclusion may also be decided by the Code of Conduct Committee as a consequence under the Code of Conduct.</blockquote>

=== Vote on Jay's Coins & Fundraising Efforts ===

A vote on whether Jay should continue the making, promoting, and distribution of NYCMakesPPE / Hack Manhattan challenge coins will be held by the membership.

== New Business ==

=== Status update on rent for coming months ===

===Sponsored Members Induction===
For each prospective member, please confirm no later than Thursday before the meeting:

* Has the member visited 3 times at the regular Tuesday and Thursday open nights?
* Has the member received the briefing? When, and who was the briefer?
* Has the member's bio and photo been circulated on the members list? (not just blabber)
==== mz ====
* Admission of mz as a member, see message to members list

==Member Reports==
=== Board Reports===
====President's Report====
* No report.
====Treasurer's Report====
* No report.
====Secretary's Report====
* Report on bylaws changes in light of code of conduct changes.

====Directors-at-Large's Report====
* No report.
===Member and Project Reports===

==Meeting Meta==
* Members in Attendance: member1, member2 | latemember1
* Visitors: visitor1, visitor2
* Called to order at 23:59 by MEMBER.
* The meeting was adjourned at 23:59 by MEMBER.
* Minutes taken and submitted by MEMBER.

[[Category:Meetings]]

Meeting 2021-03-30

2021-03-25T02:00:30Z

Br:

==Consensus Agenda==

=== Implement and adopt a CoC (Code of Conduct) ===

Rule 4 of the [[Rules]] is amended by striking the existing text and inserting:

<blockquote>The [[Code of Conduct]] applies.</blockquote>

The suspension and expulsion sanctions may require Bylaws changes which would have to be drafted and adopted at a formal meeting of members with 10 days’ notice. Giving that notice would require a board decision. The Code of Conduct will apply to the extent permitted by the Bylaws. As a temporary measure until the Bylaws can be amended, if the Code of Conduct Committee adopts a consequence that can only be implemented as a decision of the members, the Committee may recommend that consequence in a report at a business meeting, at which it must either pass on the Consensus Agenda, if there are no objections, or be voted upon without debate.

Rule 5 of the Rules is amended by adding at the end:

<blockquote>(f) An exclusion may also be decided by the Code of Conduct Committee as a consequence under the Code of Conduct.</blockquote>

=== Vote on Jay's Coins & Fundraising Efforts ===

A vote on whether Jay should continue the making, promoting, and distribution of NYCMakesPPE / Hack Manhattan challenge coins will be held by the membership.

== New Business ==

=== Status update on rent for coming months ===

===Sponsored Members Induction===
==== Admission of Michael as a member, see message to members list ====
For each prospective member, please confirm no later than Thursday before the meeting:

* Has the member visited 3 times at the regular Tuesday and Thursday open nights?
* Has the member received the briefing? When, and who was the briefer?
* Has the member's bio and photo been circulated on the members list? (not just blabber)

==Member Reports==
=== Board Reports===
====President's Report====
* No report.
====Treasurer's Report====
* No report.
====Secretary's Report====
* Report on bylaws changes in light of code of conduct changes.

====Directors-at-Large's Report====
* No report.
===Member and Project Reports===

==Meeting Meta==
* Members in Attendance: member1, member2 | latemember1
* Visitors: visitor1, visitor2
* Called to order at 23:59 by MEMBER.
* The meeting was adjourned at 23:59 by MEMBER.
* Minutes taken and submitted by MEMBER.

[[Category:Meetings]]

Meeting 2021-02-23

2021-01-29T17:15:18Z

Br: /* New Business */

==Consensus Agenda==

== New Business ==

===Sponsored Members Induction===
For each prospective member, please confirm no later than Thursday before the meeting:

* Has the member visited 3 times at the regular Tuesday and Thursday open nights?
* Has the member received the briefing? When, and who was the briefer?
* Has the member's bio and photo been circulated on the members list? (not just blabber)

==Member Reports==
=== Board Reports===
====President's Report====

====Treasurer's Report====

====Secretary's Report====

====Directors-at-Large's Report====

==New Business==
{| class="wikitable"
|+ Election Candidates
|-
! Candidates !! Nominated By !! Accepted
|-
| Peter Shenkin || Peter Shenkin, Jay, Leee || Yes
|-
| Jay || Leee || Yes
|-
| Shway|| Leee, Eliza || Yes
|-
| Br || Leee || Yes
|-
| Clyde || Leee || Yes
|}

===Member and Project Reports===

==Meeting Meta==
* Members in Attendance:
* Visitors:
* Called to order __:__ at by
* The meeting was adjourned at __:__ by.
* Minutes taken and submitted by

[[Category:Meetings]]

Meeting 2021-01-26

2021-01-19T20:46:58Z

Br: /* Consensus Agenda */ oops forgot to mention clyde

==Consensus Agenda==

=== Expense ===

Approval for initial $400 for containers and storage supplies for [[Operation_Nascent_Hikkoshi|Opearation Nascent Hikkoshi]]

Approve $250 (reimburse Clyde S.) for Mikrotik RB4011 router. To replace foo, which soon won’t have any HM members who can maintain it. Mikrotik is a step up from typical consumer routers but still easy to manage. Avoids having to install OpenWrt, which we all love but is for nerds. (Note: we may be running low on nerds)

=== Elections in 2021 ===

The pandemic means that we will need to have the 2021 annual meeting on Zoom. Normal votes (with or without proxies) can be handled on Zoom, because attendance at meetings is not huge, but elections are by secret ballot, which is more difficult to handle.

Our elections are by the Scottish Single Transferable Vote system, and have historically been counted using the OpaVote (formerly OpenSTV) software, rather than by hand. OpaVote supports online elections, so I am proposing that we use OpaVote for elections.

Historically, the deadline for announcing candidacy was immediately before the election itself. While not completely impossible, allowing candidacy to be announced during the meeting immediately before the election is impractical with online elections. The Bylaws do allow the board to set a deadline that's up to 1 week before the election. This option should be used to make the election easier to run.

So far, no other votes are planned. In principle it’s possible to do any vote (secret or not) online, but for votes other than elections, such as Bylaws changes, that is less practical because proposals may be amended. So it’s hard to cast all votes in advance; either the rules would have to reject the possibility of amending proposals, or votes would be contingent on there being no amendments adopted.

==== Decision ====

The decision to be made is:

1. The board must take care that the elections that are part of the February 2021 annual meeting of members are held online, open for a period of at least 48 hours ending during the live proceedings of the meeting (so that those participating in the live proceedings would have an opportunity to vote), using OpaVote or a similar trustworthy service, and that the live proceedings of the meeting are held by videoconference.

2. The board must set a deadline of up to 1 week before the live proceedings of the meeting to announce candidacy for elections.

3. It is the sense of the members that:

(i) A 3-day deadline is sufficient, but that a “soft” deadline of 5 to 7 days may be set, so that candidates are encouraged to announce by the soft deadline, leaving some time to recruit additional candidates before the hard deadline if not enough candidacies have been announced by the soft deadline.

(ii) The online election would form a part of the annual meeting, and so all members in good standing are allowed to vote in the online election, even if they do not attend the videoconference portion of the meeting. However, any votes other than in elections (if any should arise) are done as part of the live videoconference proceedings; casting such votes would require participation in the videoconference or giving a proxy to someone who participates, subject to the limit on number of proxies each member can vote.

(iii) Conducting an online election using OpaVote or a similar service, as part of an annual meeting whose live proceedings are by videoconference, satisfies the requirements of New York law and our Certificate of Incorporation and By-laws, in light of the emergency orders made by the Governor on corporate meetings during the Covid-19 pandemic.

== New Business ==

===Sponsored Members Induction===
For each prospective member, please confirm no later than Thursday before the meeting:

* Has the member visited 3 times at the regular Tuesday and Thursday open nights?
* Has the member received the briefing? When, and who was the briefer?
* Has the member's bio and photo been circulated on the members list? (not just blabber)

==Member Reports==
=== Board Reports===
====President's Report====

====Treasurer's Report====

====Secretary's Report====
* Not present

====Directors-at-Large's Report====
* No report.

===Member and Project Reports===

==== Building Possibilities ====

==Meeting Meta==
* Members in Attendance:
* Visitors:
* Called to order at by
* The meeting was adjourned at by .
* Minutes taken and submitted by J

[[Category:Meetings]]

Meeting 2021-01-26

2021-01-19T20:46:15Z

Br: Added router

==Consensus Agenda==

=== Expense ===

Approval for initial $400 for containers and storage supplies for [[Operation_Nascent_Hikkoshi|Opearation Nascent Hikkoshi]]

Approve $250 for Mikrotik RB4011 router. To replace foo, which soon won’t have any HM members who can maintain it. Mikrotik is a step up from typical consumer routers but still easy to manage. Avoids having to install OpenWrt, which we all love but is for nerds. (Note: we may be running low on nerds)

=== Elections in 2021 ===

The pandemic means that we will need to have the 2021 annual meeting on Zoom. Normal votes (with or without proxies) can be handled on Zoom, because attendance at meetings is not huge, but elections are by secret ballot, which is more difficult to handle.

Our elections are by the Scottish Single Transferable Vote system, and have historically been counted using the OpaVote (formerly OpenSTV) software, rather than by hand. OpaVote supports online elections, so I am proposing that we use OpaVote for elections.

Historically, the deadline for announcing candidacy was immediately before the election itself. While not completely impossible, allowing candidacy to be announced during the meeting immediately before the election is impractical with online elections. The Bylaws do allow the board to set a deadline that's up to 1 week before the election. This option should be used to make the election easier to run.

So far, no other votes are planned. In principle it’s possible to do any vote (secret or not) online, but for votes other than elections, such as Bylaws changes, that is less practical because proposals may be amended. So it’s hard to cast all votes in advance; either the rules would have to reject the possibility of amending proposals, or votes would be contingent on there being no amendments adopted.

==== Decision ====

The decision to be made is:

1. The board must take care that the elections that are part of the February 2021 annual meeting of members are held online, open for a period of at least 48 hours ending during the live proceedings of the meeting (so that those participating in the live proceedings would have an opportunity to vote), using OpaVote or a similar trustworthy service, and that the live proceedings of the meeting are held by videoconference.

2. The board must set a deadline of up to 1 week before the live proceedings of the meeting to announce candidacy for elections.

3. It is the sense of the members that:

(i) A 3-day deadline is sufficient, but that a “soft” deadline of 5 to 7 days may be set, so that candidates are encouraged to announce by the soft deadline, leaving some time to recruit additional candidates before the hard deadline if not enough candidacies have been announced by the soft deadline.

(ii) The online election would form a part of the annual meeting, and so all members in good standing are allowed to vote in the online election, even if they do not attend the videoconference portion of the meeting. However, any votes other than in elections (if any should arise) are done as part of the live videoconference proceedings; casting such votes would require participation in the videoconference or giving a proxy to someone who participates, subject to the limit on number of proxies each member can vote.

(iii) Conducting an online election using OpaVote or a similar service, as part of an annual meeting whose live proceedings are by videoconference, satisfies the requirements of New York law and our Certificate of Incorporation and By-laws, in light of the emergency orders made by the Governor on corporate meetings during the Covid-19 pandemic.

== New Business ==

===Sponsored Members Induction===
For each prospective member, please confirm no later than Thursday before the meeting:

* Has the member visited 3 times at the regular Tuesday and Thursday open nights?
* Has the member received the briefing? When, and who was the briefer?
* Has the member's bio and photo been circulated on the members list? (not just blabber)

==Member Reports==
=== Board Reports===
====President's Report====

====Treasurer's Report====

====Secretary's Report====
* Not present

====Directors-at-Large's Report====
* No report.

===Member and Project Reports===

==== Building Possibilities ====

==Meeting Meta==
* Members in Attendance:
* Visitors:
* Called to order at by
* The meeting was adjourned at by .
* Minutes taken and submitted by J

[[Category:Meetings]]

Meeting 2019-11-26

2019-11-26T22:38:12Z

Br: /* Meeting Meta */

==Consensus Agenda==

===T-shirts===

Approve $400 for new stock of Hack Manhattan T-shirts

===Vinyl cutter===

Approve $600 for vinyl cutter, location, model

===Chairs===

Approve $600 for new chairs

== New Business ==
* Membership matter
=== Formerly on Consensus Agenda ===

=== Sponsored Members Induction ===
For each prospective member, please confirm no later than Thursday before the meeting:

* Has the member visited 3 times at the regular Tuesday and Thursday open nights?
* Has the member received the briefing? When, and who was the briefer?
* Has the member's bio and photo been circulated on the members list? (not just blabber)

==Member Reports==
=== Board Reports===
====President's Report====

====Treasurer's Report====

====Secretary's Report====
No report

====Directors-at-Large's Report====

===Member and Project Reports===

=== Results ===

==Meeting Meta==
* Called to order at
* The meeting was adjourned at
* Minutes taken and submitted by
* Proxies: [[User:Mz|Mz]] for [[User:Robby_O%27Connor|Robby O'Connor]], [[User:Guan|Guan]] and [[User:Mc4bbs|TandemStacker]]; [[User:Mugenity|jay]] for [[User:jac|jc]], [[User:Leee|Lee]], and [[User:br|br]]; [[User:msemko|msemko]] for [[User:AGV|AGV]] and [[User:Tarek|Tarek]]
[[Category:Meetings]]

User:Br

2019-03-29T20:48:05Z

Br:

[[File:atbr.jpg|200px|right]]

I'm Brian Recchia, and I've been working with technology since as long as I can remember.

Relevant interests of mine include security, encryption, electronics, telecommunications, and CAD. I have been a member of both [[Main_Page|Hack Manhattan]] and [https://toool.nyc TOOOL NYC] (The Open Organisation of Lockpickers) since mid-2018.

Other interests of mine include music, video games, music, art, and music. I play bass guitar, as well as "guitar" guitar.

----

https://github.com/b-

https://ibeep.com

User:Br

2019-01-28T23:06:24Z

Br:

[[File:atbr.jpg|200px|right]]

I'm Brian Recchia, and I've been working with technology since as long as I can remember.

Relevant interests of mine include security, encryption, electronics, telecommunications, and CAD. I have been a member of both Hack Manhattan and [[TOOOL NYC|https://toool.nyc]] since mid-2018.

Other interests of mine include music, video games, music, art, and music. I play bass guitar, as well as "guitar" guitar.

----

https://github.com/b-

https://ibeep.com

Meeting 2019-01-29

2019-01-27T20:50:08Z

Br: /* Consensus Agenda */

==Consensus Agenda==

* TOOOL NYC would like to use the space to host meetings. So far, we are asking to use the space on the second Wednesday of the month, 6p~9p (I will update this if I made a mistake there) and we are not asking for private/controlled access (at least at this present time — if we decide we want to do private meetings here, we’ll bring it up at another meeting). [[user:Br]] and prospective member [[user:mc4bbs]] are active TOOOL members. Presently [[user:br]] will host, and if/when [[user:mc4bbs]] becomes a member he will also be able to host.
** We’d also like to store a medium sized toolbox full of supplies, to prevent having to lug it around the city! It’s five or take about the size of four of our plastic shoeboxes. Maybe a little deeper. And extremely heavy.

== New Business ==

=== Sponsored Members Induction ===
For each prospective member, please confirm no later than Thursday before the meeting:

* Has the member visited 3 times at the regular Tuesday and Thursday open nights?
* Has the member received the briefing? When, and who was the briefer?
* Has the member's bio and photo been circulated on the members list? (not just blabber)

==New (not sponsored) Members==
New Member [[User:KRTaylorIII|Kent Taylor]]

==Member Reports==
=== Board Reports===
====President's Report====

====Treasurer's Report====

====Secretary's Report====

====Directors-at-Large's Report====

===Member and Project Reports===

==Meeting Meta==

[[Category:Meetings]]

Main Page

2019-01-26T20:33:50Z

Br: /* Meetings & Events */

[[File:HMpano2.jpg|800px]]

= Hack Manhattan! =

Hack Manhattan is a nonprofit cooperative space in Manhattan dedicated to technology, science, and the arts. We're the only public hackerspace in Manhattan. Get involved. Bring your curiosity, intellect, and imagination. Visit [http://hackmanhattan.com our website].

'''NOTE: ''' This wiki is public, but only approved users may edit. All Hack Manhattan members should have an account. Non-members -- to contribute, please sign up for an account and we'll respond ASAP.

<table width="100%">
<tr>
<td valign="top" width="48%">

== Location ==

We're centrally located near the L/F/M/1/2/3/A/C/E/PATH trains and 2.5 blocks west of Union Sq (4/5/6/N/Q/R trains).

[http://maps.google.com/maps?q=137+West+14th+st+ny+ny 137 W 14th Street, Studio 201, New York, NY 10011-7308]

== [[MembershipInfo|Membership]] ==

Hack Manhattan is accepting new members. See [[MembershipInfo]] for more details.

== Meetings & Events ==

=== [[Calendars|Events]] ===

* [http://hackmanhattan.com/calendar/ Calendar]
* [http://www.meetup.com/hackmanhattan/ Meetup]

=== Monthly Business [[Meetings]] ===
Monthly meetings are held at 7:30PM on the last Tuesday of each month and are conducted in accordance with [[MIBS Rules]]. You can read the [[Meetings|minutes of previous meetings]] or the next one:

* [[Meeting 2019-01-29]]

== About the space and building==

* [[Rat Park]] (the building)
* [[Facilities]]
* [[Wish_List | Gear wishlist]]

* [[Tools and Equipment]]


== Resources ==
* [[Administration]]
* [[Building]]
* [[Bylaws | HackManhattan! By-laws]] and [[MIBS Rules | Meeting Procedure (SRC3)]]
* [http://list.hackmanhattan.com/mailman/listinfo/blabber Mailing list] ([http://www.mail-archive.com/blabber@list.hackmanhattan.com/ archives])
* IRC: #hackmanhattan @ irc.freenode.net [[http://webchat.freenode.net/?channels=hackmanhattan Web Chat]]
* [http://www.reddit.com/r/hackmanhattan/ /r/hackmanhattan]
* [[Suppliers | Suppliers, Vendors, Sources of stuff!]]
* [[FundRaising | Fund-raising ideas, links, projects]]
* [[Meeting_2013-03-26#Space_use_policy|Space Use Policy]]
* [[Cool Links | Cool Links to Hackerspaces, Blogs, Etc.]]
* [[Local Resources]] Places of interest close to HackManhattan!
* [[Bad Jokes Related to Hacking]] Like the name says it....
* [[Logos and Files]]
* [[3D Printing Resources]]
* [[Welding Resources]]
* [[Affiliate]]
* [[Operations]]
* [[Electronics]]
* [[Hackerspaces]]
* [[Gigs]]
</td>
<td width="1%" style="
border-right:solid 1px #a7d7f9;"></td>
<td width="1%"></td>
<td valign="top" width="48%">

== [[Projects|Projects / Interest Groups]] ==

{{:Projects}}

== [[Individual Pages]] ==

{{:Individual Pages}}

</td>
</tr>
</table>

__NOTOC__

Meeting 2019-01-29

2019-01-25T22:39:13Z

Br: Created page with "==Consensus Agenda== * TOOOL NYC would like to use the space to host meetings. So far, we are asking to use the space on the second Wednesday of the month, 6p~9p (I will upda..."

==Consensus Agenda==

* TOOOL NYC would like to use the space to host meetings. So far, we are asking to use the space on the second Wednesday of the month, 6p~9p (I will update this if I made a mistake there) and we are not asking for private/controlled access (at least at this present time — if we decide we want to do private meetings here, we’ll bring it up at another meeting). [[user:Br]] and prospective member [[user:mc4bbs]] are active TOOOL members. Presently [[user:br]] will host, and if/when [[user:mc4bbs]] becomes a member he will also be able to host.

== New Business ==

=== Sponsored Members Induction ===
For each prospective member, please confirm no later than Thursday before the meeting:

* Has the member visited 3 times at the regular Tuesday and Thursday open nights?
* Has the member received the briefing? When, and who was the briefer?
* Has the member's bio and photo been circulated on the members list? (not just blabber)

==New (not sponsored) Members==
New Member [[User:KRTaylorIII|Kent Taylor]]

==Member Reports==
=== Board Reports===
====President's Report====

====Treasurer's Report====

====Secretary's Report====

====Directors-at-Large's Report====

===Member and Project Reports===

==Meeting Meta==

[[Category:Meetings]]

3D Printing

2018-06-06T15:12:22Z

Br: /* 3D Printing */

[[Category:3D Printing]]

== 3D Printing ==




<table border=2>
<tr><td cellpadding=5>The Ultimaker is:</td>
<td cellpadding=5 bgcolor=#00cc33><center>OPERATIONAL</center></td></tr>


<tr><td cellpadding=5>Comments:</td><td cellpadding=5></td></tr>
</table>
<table border=2>
<tr><td cellpadding=5>The Printrbot Jr. is:</td>
<td cellpadding=5 bgcolor=#00cc33><center>OPERATIONAL</center></td></tr>


<tr><td cellpadding=5>Comments:</td><td cellpadding=5></td></tr>
</table>

- Thursday nights are 3D Thursdays! Visit us from 7 p.m. onwards on Thursday nights.. Whether you just want to learn how to print, have some objects or designs in mind for printing, or just want to use our printers, feel free to drop in and give it a try. If you do have specific models in mind, it would be a good idea to check if they are printable first, as some models will print better than others. Please direct model enquiries to info@hackmanhattan.com.

We have several 3D printers in use at the space:

- [[User:Guan|Guan]] loaned his [[PrusaMendelV2 | Prusa Mendel V2]], to the space. It can print in PLA or ABS, but we prefer you use PLA if possible. There are instructions on how to use it [[PrusaMendelV2 Howto|here]]

- [[User:rmd6502|Rob]] bought an [[Ultimaker]] and loaned it to the space. This printer works very well, producing nice prints and is reliable.

- The excellent Brook Drumm of [http://www.printrbot.com Printrbot] donated a number of Printrbots to the space, which can be used by visitors. One of the Printrbot Jr printers is hosted on a Raspberry Pi running Octoprint, with CuraEngine slicer integration. Login to it using the IP address printed on the side of the printer, and upload an STL!

- We built and modified several [[Wallace]] [http://reprap.org/wiki/Wallace Repraps].

- We also [http://www.meetup.com/hackmanhattan/events/123274682/ run classes] on how to build your very own Printrbot [[Simple]] 3D Printer.

- We have a list of [[3D Printing Resources | 3D printing resources]] and [[3D Projects]] that have been done at HM.

- There are several ways to do [[3D Scanning]] of objects at HM.

=== Ultimaker ===
The following attachment contains the ini file with optimal settings to be used with the ultimaker original at HM.

==== Procedures ====
Plug the power brick attached to the fans under the ultimaker before you start printing. Failure to do so will result in broken print jobs.
Before the sd card slot seems to unseat during long prints with frequent vibrations, a raspberry pi with Octoprint was connected to the ultimaker. Load the gcode from octoprint to start the print job.

[[File:HMUltimakerProfile.ini.zip]]

Default x,y steps: 78.74 78.74
New values: 79.50 79.53

==== Octoprint ====
http://192.168.42.158/ on internal network for Ultimaker. See printrbot jr for credentials.

=== CTC ===
The black 3d printer located on the left of the ultimaker. It can only print using .x3g files. The space desktop has an installation of Simplify3D that's able to generate the files. The printer files should be transferred via SD Card.

== Interested People ==
* [[user:James|James Carpino]]
** Active 3D printing enthusiast. Building Miniature 3D Printers and can answer questions about 3D printer assembly, design, and use.

* [[user:DrReeves|Dave]]
** Your 3D Thursday Host. Owns a Prusa Mendel and a couple of Printrbots. Will help others to learn to print, build more printers, and learn to refine prints. Also food printing. Also available for hire on 3D printing projects (DrReeves@gmail.com).

* [[user:Cstratton|Chris Stratton]]
** Past experience with inkjet/powder 3D Printing Group at MIT, also hacked on some CNC machine tool conversions
** Moderate interest in a access to a machine with a build volume the size of an adult human foot
** Eager to help with with any DIY machine project regardless of build volume/capabilities

* [[user:Jonathan|Jonathan]]

* [[user:Skreuzer|Steven Kreuzer]]
** I left my [[Makerbot Cupcake CNC]] at the space. Feel free to use it

==== To-do ====
* Document ideal printer settings for all devices.
* Incorporate integration on slack to track printer statuses

Individual Pages

2018-05-19T02:49:02Z

Br:

User:Br

2018-05-19T02:48:55Z

Br:

[[File:atbr.jpg|200px|right]]

I'm Brian Recchia, and I've been working with technology since as long as I can remember.

Relevant interests of mine include security, encryption, electronics, telecommunications, and CAD.

Less-relevant interests of mine include music, video games, music, art, and music. I play bass guitar, as well as "guitar" guitar.

----

https://github.com/b-

https://ibeep.com

User:Br

2018-05-17T19:59:23Z

Br:

[[File:atbr.jpg|200px|right]]

I'm Brian, and I've been working with technology since as long as I can remember.

Relevant interests of mine include security, encryption, electronics, telecommunications, and CAD.

Less-relevant interests of mine include music, video games, music, art, and music. I play bass guitar, as well as "guitar" guitar.

----

https://github.com/b-

https://ibeep.com

File:Atbr.jpg

2018-05-17T19:57:02Z

Br: